Accepta 8301 is a superior quality, high-performance solid aluminium sulphate based primary coagulant available in either slab alum (Flocc Block), Kibbled or Powder form. It is scientifically formulated for the treatment of a range of commercial, municipal and industrial process wastewaters and effluents.
Its excellent performance characteristics make Accepta 8301 ideal for use in industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries.
Accepta 8301 is an effective primary coagulant based on trivalent aluminium and is virtually iron-free.
Accepta 8301 is used for the treatment of potable water as well as process water, and sewage and industrial effluents.
Aluminium Sulphate (Sulfate) works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.
Accepta 8301 is supplied as a solid as 15-17% by weight aluminium sulphate in the form of slabs, kibbled or powder grades.
Fields of Application
Accepta 8301PDR has a wide range of applications including:
- Industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries
- Treatment of potable and process water
- Paper sizing agent
- Water recycling
Accepta 8301 Solid Bloc applications:
- Open cast mining water run-off
- Quarry run-off
- Drinking water at remote sites
- Effluent treatment at remote sites
- Solid aluminium sulphate (sulfate) available in several forms – including slab alum
- High performance primary coagulant based on trivalent aluminium
- Excellent for potable and process water treatment
- Virtually iron-free
- Promotes more efficient sludge digestion and dewatering
- Paper sizing agent
|Appearance:||Solid / Powder|
|Form:||Powder or granules|
|Al2O3:||17% ground / 15% Solid|
|Combined Alumina as Al2O3:||16.15% – 17.4%|
|Basic Alumina as Al2O3:||0.6% neutral|
|TOTAL Alumina as Al2O3:||16.75% – 17.4%|
|TOTAL Iron as Fe2O3:||0.006% Max|
|% retained on 1.7mm sieve:||10% Max|
|Melting point/freezing point:||120 – 140 °C (248 – 284 °F)|
|Boiling point, initial boiling point:||770 °C (1,418 °F) Decomposes|
|Specific gravity;||1.61 estimated|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For application advice regarding Accepta 8301 please contact us.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.