Description
Accepta 8305 is a technically advanced, high-performance coagulant based on aluminium hydroxide chloride blended with an organic polymer, scientifically formulated for the treatment of industrial effluent including wastewaters from food and dairy processing; and the oil, textile and chemical industries.
Accepta 8305 works by neutralising the negative charge on dissolved and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes. Additionally, it also promotes more efficient sludge digestion and dewatering.
The active component in Accepta 8305 is a highly cationic aluminium polymer present in low concentration, which is represented as:
[Al13O4(OH)24(H2O)12]7+
Fields of Application
Accepta 8305 has a wide range of applications including:
- Industrial and municipal effluent treatment
- Organic load reduction
- Colour removal eg textiles wastes
- Printing ink waste
- Phosphate reduction
Product Benefits
- High performance coagulant based on aluminium hydroxide chloride
- Low cationic charge
- Low temparature performance
- Good COD removal
- Up-rate your plant capacity
- Very low sludge volume
- Reduce your chemical dose and treatment costs
Product Properties
| Physical state: |
Liquid |
| Al2O3: |
10% (w/w) |
| Basicity: |
5-10% |
| Charge: |
+500 |
| Colour: |
Colourless to light yellow |
| Odour: |
Not significant |
| pH: |
< 1 |
| Melting point/freezing point: |
< 0 °C (< 32 °F) |
| Boiling point, initial boiling point: |
100 – 120 °C (212 – 248 °F) |
| Density: |
1.20 – 1.30 g/cm3 @ 20 oC |
| Solubility (water): |
Miscible |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 8305 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.
Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.
The optimum dosage should be determined in each application using standard jar test procedure.
Accepta 8305 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.
For further application advice regarding Accepta 8313 please contact us.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.
