Multi-Functional Scale & Corrosion Inhibitor with Anti-Foulant – 6102

Available in Bottle, Disk or Stick form

  • Accepta 6102: 4 x 5.45kg Bottles
  • Accepta 6102D: 8 x 2.5kg Disks
  • Accepta 6102S: 30 x 350g Sticks contained in water-soluble bags

Description

Accepta 6102 all organic, multi-functional scale and corrosion inhibitor

Accepta 6102 is an advanced, all organic, multi-functional scale and corrosion inhibitor in solid form.

Accepta 6102 is environmentally benign as it does not contain any heavy metals such as zinc and also has a low phosphorous content.

Accepta 6102 provides corrosion inhibition to both ferrous and non-ferrous metals and protects cooling systems from calcium precipitation, phosphate and iron fouling as well as general fouling.

Accepta 6102 can also utilise any phosphate present in the make-up water to further enhance the level of corrosion protection.

Accepta 6102 also contains a fluorescent tracer (PTSA) which enables quick, accurate and safe on site analysis, Accepta 6102 can also be dosed automatically using specific inline probes to ensure that the correct reserves are maintained at all times independent of system load and cycles of concentration.

HOW MUCH TO USE

Accepta 6102 should be dosed to cooling water systems in accordance with operating conditions and based on the stability index of the system water.  PTSA fluorometers or Phosphonate test kits may be used for testing the active ingredients.

PROPERTIES

Appearance:                 Solid – Tan to Brown

Odour:                         Slight

pH:                               ~7 @1%

HANDLING AND STORAGE

Accepta 6102 should be stored in its original container away from direct sunlight and in a cool dry area.  Properly stored, the product will remain effective for 24 – 36 months.  Consult Safety Data Sheet for further information.

SPILLAGE AND DISPOSAL

Accepta 6102 is a solid product. In the unlikely event of a spillage, do not allow to enter water course or drains. Small spillages – dilute with plenty of water and wash to waste.

PACKAGING

Accepta 6102 is available in 5kg containers.

Accepta 6102 is also available in 2.25kg Discs & 0.35kg sticks

FEEDING

Feed Accepta 6102 using an Accepta board system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6102 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg