Accepta 6016 is a high-performance, highly concentrated solid chemical cooling water treatment scientifically formulated to treat and protect galvanized steel cooling towers from white rust conditions.
Accepta 6016 is suitable for use in both new installations and systems that must be routinely passivated. It uses the very latest anti-scaling and corrosion inhibition technologies.
Accepta 6016 corrosion inhibitors combine with conventional chemistry to provide system protection via passivation.
Accepta 6016 contains ortho phosphate, polymer dispersant and triazole.
Accepta 6016 is available in fully recyclable plastic bottles each containing 5kg of concentrated solid chemical.
Accepta 6016 is packaged in cases containing 4 x 5kg bottles.
Each case weighs 20kg.
- Innovative solid chemical technology
- High performance scale and corrosion inhibitor
- Ideal for protecting galvanised steel cooling towers from white rust conditions
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous blend|
|Softening point:||Not applicable|
|Bulk density:||1197 kg/m3|
|Solubility in water:||Complete at ambient temperatures|
|pH (1% solution):||~9.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
At a dosage rate of 250 ppm the parameters identified in the table below should be met during the passivation period.
Operators should also refer to the tower manufacturers guidelines for additional detail.
|Water Quality Range||Dosage||Test Range|
|pH||Calcium||Alkalinity||Chemical level in recirculating water||Ortho PO4|
|6.5 – 8.0||100 – 300ppm||100 – 300ppm||250 ppm||100 ppm|
At a dosage rate of 20 ppm, 1 case of Accepta 6016 is equivalent to approximately 227kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.
Testing & Control
Ortho phosphate test kits suitable for monitoring and controlling the use of Accepta 6016 are available from Accepta.
Feed Accepta 6016 using an Accepta 6016 board system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6016 please contact Accepta.