Accepta 6003 is a high-performance, highly concentrated solid chemical multi-functional cooling water treatment scientifically formulated using the very latest anti-scaling, anti-fouling, and corrosion inhibition technologies; and a molybdate tracer.
Accepta 6003 is a highly effective cooling water treatment product developed for “stressed” conditions. It uses the very latest anti-scaling, anti-fouling, and corrosion inhibition technologies.
Its scale dispersant and corrosion inhibitors work with conventional chemistry to provide system protection at low product dosage rates.
Accepta 6003 contains PBTC phosphonate, HEDP phosphonate, Versaflex one, Ter-polymer, triazole and molybdate tracer.
Accepta 6003 is a concentrated solid chemical available in fully recyclable plastic bottles each containing 5.5kg of product.
Accepta 6003 is packaged in cases containing 4 x 5.5kg bottles.
Each case weighs 21.8kg.
- Innovative solid chemical technology
- High performance multi-functional scale and corrosion inhibitor incorporating a molybdate tracer
- Provides system protection at low product dosage rates
- Additional molybdate tracer added
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Tan to brown amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 – 55 oC|
|Bulk density:||1098 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||8.0 – 9.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6003 can be used in cooling tower water systems using the following dosage rates. The application rates provided below are based on set water stability indices, however in practice, dosage rates should be set to suit individual water conditions.
|Water Quality Range||Dosage||Test Range|
|Calcium||Alkalinity||Chemical level in
|6.0 – 4.0||200 – 500ppm||200 – 500ppm||15 – 25ppm||3 – 5ppm||0.75 – 2.0ppm|
|4.0 – 3.0||500 – 800ppm||500 – 600ppm||25 – 40ppm||4 – 6ppm||1.5 – 3.0ppm|
|< 3.0||800+ppm||600+ppm||40+ppm||6 – 8ppm||4ppm|
Note – with comparative liquid products, at a dosage rate of 20 ppm, 1 case of Accepta 6003 is equivalent to approximately 227kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.
Testing and Control
Molybdate (as Mo) test kits suitable for monitoring and controlling the use of Accepta 6003 are available from Accepta. Accepta test kits for Organo-phosphonate can also be used.
Feed Accepta 6003 using an an Accepta board system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6003 please contact Accepta.