Corrosion Inhibitor, Dispersant, Cleaner & Copper Metal Inhibitors for Closed Systems – 6035 Baton

Packaged in cases containing 30 x 0.36kg water soluble batons.

Each case weighs 10.9kg.

Description

Accepta 6035 is a high performance, highly concentrated solid chemical corrosion inhibitor with additional dispersant, cleaner and copper metal inhibitors, scientifically formulated for the treatment and protection of closed loop water systems.

Accepta 6035 is a stand-alone treatment for corrosion inhibition in closed water systems and uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.

Accepta 6035 comprises a small (0.36kg) solid chemical baton wrapped in a water soluble bag. It uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.

Accepta 6035 contains no nitrites or molybdate.

Accepta 6035 contains silicates, borax, acrylates, phosphino corrosion inhibitors, dispersant/cleaner, and copper metal inhibitors.

Accepta 6035 is packaged in cases containing 30 x 0.36kg water soluble batons, each baton being enclosed in a sealed cardboard tube.

Each case weighs 10.9kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance corrosion inhibitor for closed loop water systems
  • Excellent corrosion control for both chilled water and hot water boiler systems
  • Contains additional dispersant, cleaner and copper metal inhibitors
  • Can be used as a stand-alone treatment
  • Nitrite and molybdate free product
  • Small, light weight handy baton sized treatment product
  • Excellent “catch-up” solution
  • Ideal for smaller systems
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Tan to brown amorphous solid
Odour: Slight characteristic odour
Softening point: 49 – 55 oC
Bulk density: 1197 kg/m3
Solubility in water: Complete but dissolves slowly
pH (1% solution): 8.5 – 9.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 6035 can be used at a federate of 0.36kg per 1800 litres of water capacity (200 ppm).

Testing & Control

Organo phosphonate test kits suitable for monitoring and controlling the use of Accepta 6035 are available from Accepta.

Monitor at 15 – 20 ppm.

Feeding

Add Accepta 6035 into a shot feeder or open tank. Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6035 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg