Accepta 6033 is a high performance; highly concentrated solid chemical corrosion inhibitor with additional molybdate tracer scientifically formulated for the treatment and protection of closed loops and closed circuit water systems.
Accepta 6033 is a stand-alone treatment for corrosion inhibition in closed circuit water systems and uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.
Accepta 6033 comprises a small (0.36kg) solid chemical baton wrapped in a water soluble bag. It uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.
Accepta 6033 contains no nitrites.
Accepta 6033 contains silicates, borax, acrylates, phosphino corrosion inhibitors and copper metal inhibitors; plus a molybdate tracer for testing and control purposes.
Accepta 6033 is packaged in cases containing 30 x 0.36kg water-soluble batons, each baton being enclosed in a sealed cardboard tube.
Each case weighs 10.9kg.
- Innovative solid chemical technology
- High performance corrosion inhibitor for closed loops and clsoed circuit water systems
- Incorporates a molybdate tracer for improved accuracy in testing and control
- Can be used as a stand-alone treatment
- Small, light weight handy baton sized treatment product
- Excellent “catch-up” solution
- Ideal for smaller systems
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Tan to brown amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 – 55 oC|
|Bulk density:||1197 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||8.0 – 9.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6033 can be used at a feed rate of 1kg per 3960 litres of water capacity.
Testing & Control
Molybdate (as Mo) test kits suitable for monitoring and controlling the use of Accepta 6033 are available from Accepta.
Add Accepta 6033 into a shot feeder or open tank. Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6033 please contact Accepta.