Corrosion Inhibitor with Molybdate Tracer for Closed Circuit Water Systems – 6032 Bottle

packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Description

Corrosion Inhibitor with Molybdate Tracer for Closed Circuit Water Systems - Bottle

Accepta 6032 is a high performance; highly concentrated solid chemical corrosion inhibitor with additional molybdate tracer scientifically formulated for the treatment and protection of closed loops and closed circuit water systems.

Accepta 6032 is a stand-alone treatment for corrosion inhibition in closed circuit water systems and uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.

Accepta 6032 contains no nitrites.

Accepta 6032 contains silicates, borax, acrylates, phosphino corrosion inhibitors and copper metal inhibitors; plus a molybdate tracer for testing and control purposes.

Accepta 6032 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Accepta 6032 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance corrosion inhibitor for closed circuit water systems
  • Incorporates a molybdate tracer for improved accuracy in testing and control
  • Can be used as a stand-alone treatment
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Tan to brown amorphous solid
Odour: Slight characteristic odour
Softening point: 49 – 55 oC
Bulk density: 1197 kg/m3
Solubility in water: Complete but dissolves slowly
pH (1% solution): 8.0 – 9.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 6032 can be used at a federate of 1kg per 3960 litres of water capacity.

Testing & Control

Molybdate (as Mo) test kits suitable for monitoring and controlling the use of Accepta 6032 are available from Accepta.

Molybdate (as Mo) at 8 – 10 ppm.

Feeding

Feed Accepta 6032 using an Accepta board system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6032 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg