Description
Accepta 6308 is a solid phosphate donor for use in steam boilers and generators where phosphate reserves of 30-60 are required as PO4
Accepta 6308 contains only ingredients approved under the United States Food & Drug Administration Regulations Title 21, Section 173.310 Boiler Water Additives.
HOW MUCH TO USE
Accepta 6308 should be dosed to the feedwater to product reserve suitable for the boiler operating conditions and in consideration of the recommendations set out in BS2486 – 1997.
PROPERTIES
Appearance: Solid – White granular/powder
Odour: mild
pH: ~ 7 @1%
HANDLING AND STORAGE
Accepta 6308 should be kept away from acids and oxidising agents in a cool dry area. Properly stored, the product will remain effective for 24 – 36 months. Consult Safety Data Sheet for further information
SPILLAGE AND DISPOSAL
Accepta 6308 is a solid product. In the unlikely event of a spillage, do not allow to enter water course or drains. Small spillages – dilute with plenty of water and wash to waste.
PACKAGING
Accepta 6308 is available in 4 kg containers (4 to a case).
FEEDING
Feed Accepta 6308 using an Accepta board system.
Available in three types:
- Gravity Fed – No pump needed, requires controller relay or timer
- Electronic Level Control – Pump needed
- Mechanical – Pump needed
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6308 please contact Accepta.
