Multi-Functional Boiler Water Treatment – 6055 Bottle

Packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Description

Accepta 6055 is a high performance, highly concentrated multi-functional solid chemical boiler water treatment product scientifically formulated for the treatment and protection of boiler systems.

Accepta 6055 is a versatile boiler water treatment product incorporating corrosion inhibitors, polymeric scale inhibitors, alkalinity builders; and a condensate corrosion inhibitor.

Accepta 6055 also contains additional sulphite making it suitable for use in systems where no de-aerator or heater is available.

All components of Accepta 6055 conform to US FDA Title 21, Section 173 Boiler Water Additives.

Accepta 6055 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Accepta 6055 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance multi-functional boiler water treatment
  • Incorporates corrosion inhibitors, polymeric scale inhibitors, alkalinity builders; and a condensate corrosion inhibitor
  • Suitable for systems with no de-aerator or heater
  • FDA approved
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Solid
Odour: Slight characteristic odour
Softening point:
Bulk density:
Solubility in water:
pH (1% solution):

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

1kg of Accepta 6055, dosed at a rate of 100 ppm will treat approximately 22,000lbs of boiler blowdown.

One case of Accepta 6055 (21.8kg) is equivalent to 114kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Testing & Control

Testing In Boiler Water
In Condensate Return
Sulphite 20 – 30 ppm
p-Alkalinity 250 – 600 ppm
Conductivity See manufacturers guidelines
pH 7.0 – 8.5
Iron  <1ppm

Test kits suitable for monitoring and controlling the use of Accepta 6055 are available from Accepta.

Feeding

Feed Acepta 6055 using an Acepta board system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6055 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg