Accepta 6047 is a high-performance, highly concentrated solid chemical boiler water oxygen scavenger scientifically formulated for the treatment and protection of boiler systems from oxygen associated corrosion issues.
Accepta 6047 has been developed to reduce the potential for oxygen corrosion in boiler water systems, and to protect condensate systems from corrosion.
Accepta 6047 is based on sodium sulphite, sodium lignosulphate, bisulphite, and eythorbate.
Accepta 6047 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.
Accepta 6047 is packaged in cases containing 4 x 5.5kg bottles.
Each case weighs 21.8kg.
- Innovative solid chemical technology
- High performance boiler water oxygen scavenger
- Based on sodium sulphite, sodium lignosulphate, bisulphite, and eythorbate
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Near black amorphous solid|
|Bulk density:||1197 kg/m3|
|Solubility in water:||20-25% at ambient temperatures|
|pH (1% solution):||~10.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
1kg of Accepta 6047, dosed at a rate of 30 ppm will treat approximately 73,333 lbs of boiler blowdown. This is dependent on the levels of oxygen being removed mechanically.
One case of Accepta 6047 (21.8kg) is equivalent to 114kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.
Testing & Control
|Testing||In Boiler Water|
|Sulphite||20 – 60 ppm|
Test kits suitable for monitoring and controlling the use of Accepta 6047 are available from Accepta.
Feed Accepta 6047 using an Accepta board system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6047 please contact Accepta.