Sodium hydrogen sulphate pH reducer for cooling systems – 6205

Packaged in cases containing 4 x 5kg bottles.

Each case weighs 20kg.

Description

Accepta 6205 is a solid form sodium hydrogen sulphate based dry acid designed for use as a pH reducer in open recirculating cooling systems where acid dosing is required.

APPLICATION

Accepta 6205 should be dosed via pH probe control linked to a cooling tower controller. The pH should be set to a range designated by the cooling tower manufacturer or the operating range of the biocide and other chemical treatments in use.

PROPERTIES

Appearance:                 Solid – White free flowing granules

Odour:                         mild

pH:                               ~ 1  @1%

HANDLING AND STORAGE

Accepta 6205 should be kept away from alkalis and oxidising agents in a cool dry area.  Properly stored, the product will remain effective for 18 – 24 months.  Consult Safety Data Sheet for further information

SPILLAGE AND DISPOSAL

Accepta 6205 is a solid product.  In the unlikely event of a spillage, do not allow to enter water course or drains. Small spillages – dilute with plenty of water and wash to waste.

PACKAGING

Accepta 6205 is available in 5kg HDPE bottles (4 to a case).

FEEDING

Feed Accepta 6205 using an Accepta board system.

For further technical assistance concerning Accepta 6205 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg