Accepta 6029 is a high performance; highly concentrated solid chemical low foaming dispersant and penetrant scientifically formulated for the treatment of cooling towers and cooling water systems. Accepta 6029 assists in the prevention and removal of organic materials and foulants.
Accepta 6029 is engineered to supplement cooling system inhibitor / dispersants and biocides to maintain clean surfaces in cooling towers and heat transfer equipment.
Accepta 6029 works to penetrate the matrix of organic surface deposits which are broken up and then disperse. Accepta 6029 can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems.
Accepta recommended that Accepta 6029 is used in conjunction with Accepta biocides to help maintain a clean system. There is also a lower tendency for agglomeration with anionics than typical ADBAC quaternary compounds.
Accepta 6029 is available in fully recyclable plastic bottles each containing 4.1kg of concentrated solid chemical.
Accepta 6029 is packaged in cases containing 4 x 4.1kg bottles.
Each case weighs 16.4kg.
- Innovative solid chemical technology
- High performance low foaming dispersant and penetrant
- Ideal for cooling towers and cooling water systems
- Assists in the prevention and removal of organic materials and foulants
- Can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Solubility in water:|
|pH (1% solution):|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6029 should be fed at a rate of 20 ppm. Increase this dosage rate for fouled systems or during initial start-up/charging of the system.
Always feed a biocide to kill bacteria and algae in the system.
When using Accepta 6029 to clean heavily fouled systems, care should be taken to prevent clogging of screens and strainers.
Please note that this product may cause foaming when fed at high levels.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Testing & Control
ATP or colony count test kits suitable for monitoring and controlling the use of Accepta 6029 are available from Accepta.
Feed Accepta 6029 using an Accepta board system.
For further technical assistance concerning Accepta 6029 please contact Accepta.