Accepta 6024 is a high performance; highly concentrated solid chemical cooling water dispersant and penetrant, scientifically formulated to assist in the prevention and removal of organic materials and foulants from cooling towers and cooling water systems.
Accepta 6024 is engineered to supplement cooling system inhibitor/dispersants and biocides to maintain clean surfaces in heat transfer equipment and cooling towers.
Accepta 6024 works to penetrate the matrix of organic surface deposits which are broken up and then disperse. Accepta 6023 can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems.
Accepta recommended that this product is used in conjunction with Accepta biocides to help maintain a clean system.
Accepta 6024 is available in fully recyclable plastic bottles each containing 4.1kg of concentrated solid chemical.
Accepta 6024 is packaged in cases containing 4 x 4.1kg bottles.
Each case weighs 16.4kg.
- Innovative solid chemical technology
- High performance cooling system dispersant and penetrant
- Supplements cooling system inhibitor/dispersants and biocides to maintain clean surfaces in heat transfer equipment and cooling towers
- Can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous solid|
|Odour:||Slight characteristic odour|
|Bulk density:||898 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||7.0 – 8.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For existing clean surfaces Accepta 6024 should be used 1 to 3 times per week and fed at a rate of 60 -120 ppm.
For systems that have a greater tendency to foul, Accepta 6024 should be used 2 to 3 times per week and fed at a rate of 100 – 200 ppm.
For heavily fouled systems, Accepta 6024 should be used daily and fed at a rate of 100 – 200 ppm, until the system is clean.
Always feed a biocide to kill bacteria and algae in the system.
When using Accepta 6024 to clean heavily fouled systems, care should be taken to prevent clogging of screens and strainers.
Please note that this product may cause foaming when fed at high levels.
Testing & Control
ATP or colony count test kits suitable for monitoring and controlling the use of Accepta 6024 are available from Accepta.
Feed Accepta 6024 using an Accepta board system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6024 please contact Accepta.