Treatment for Corrosion Control of Drinking Water Lines – Waterguard S

Available in 25Kg drums/kegs

200Kg and IBC orders are POA

 

Description

ACCEPTA WATERGUARD S

Treatment for Corrosion Control of Drinking Water Lines

Description and Use

ACCEPTA WATERGUARD S is a clear, odourless and tasteless corrosion inhibitor for the protection of drinking water and domestic water systems which is harmless at normal use levels. It is effective in controlling corrosion in pipe lines and storage tanks, particularly where supply water is either softened or naturally low in alkalinity, resulting in ‘Red Water’ and general corrosion, which can be particularly troublesome in Hospitals and Hotels.

Application

ACCEPTA WATERGUARD S will not affect the appearance or taste of water in any way. It is approved by the UK Drinking Water Inspectorate for treatment of potable water and has wide international approval.

Dosage Rates

ACCEPTA WATERGUARD S treatment should be continuously dosed to maintain a silica level of 8-10ppm above the raw water silica content.

For automatic proportional dosing the use of a packaged water meter controlled dosing set is advised.

Typical Properties

Appearance……………………………. Clear viscous liquid

Odour……………………………………. None

Freezing Point………………………… -1.5oC

Flash point…………………………….. None

pH………………………………………… >12

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg