Description
Accepta 3540 is a high-performance solvent based, self-emulsifying quick break cleaner scientifically formulated for cleaning activities where heavy soiling is encountered.
NOTE: This product is no longer available and has been replaced by the following alternative:
Accepta 3538
If you require product selection assistance or technical advice please contact us.
A technically advanced formulation, Accepta 3540 rapidly demulsifies under static conditions after rinsing, in order to permit the acceptable discharge of wastewater.
Accepta 3540 is a very versatile cleaning product and can be used in a wide range of applications where heavy soiling is encountered.
Product Benefits
- High-performance self-emulsifying quick break cleaner
- Designed for heavy soiling
- Technically advanced formululation
- Rapidly demulsifies to permit discharge of waste water
Product Properties
Form: | Liquid |
Colour: | Colourless |
Odour: | Hydrocarbon |
Specific gravity: | 0.79 |
Flash point: | 40 oC |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Apply Accepta 3540 by brush or spray directly onto soiled areas. Allow a contact time of about 5 minutes then rinse the emulsion off with hot or cold water at a typical pressure of 80 – 100psi.
Allow rinse water to dwell in oil/water separator for 30 minutes before discharge of the aqueous layer.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 3540 please contact Accepta.