Accepta 4903 is a high performance; sulphur based heavy metal precipitant scientifically formulated for the treatment and removal of heavy metals from wastewater and effluent streams.
Accepta 4903 is an environmentally friendly heavy metal precipitation aid based on chelating agents with superior flocculating capabilities.
Accepta 4903 exhibits a high charge and low high molecular weight.
Accepta 4903 comprises a water-based solution, available ready-to-use without prior dissolution or expensive make-up equipment.
The versatile molecular architecture of Accepta 4903 allows the formation of flocs adapted to any plant design.
Carry-over of flocs in overflows that would normally reintroduce heavy-metals back into the treated water are reduced and suppressed by the addition of flocculants and/or coagulants.
The large floc size that can be achieved using Accepta 4903 also ensures rapid settling and easy de-watering of the sludge.
Coagulant / flocculant usage rates can be reduced, and sometimes eliminated when the correct product grade is used.
The formation of a dense, compact sludge also helps to minimise disposal costs.
Accepta 4903 is effective against a wide range of metals and removes co-existing heavy-metals at the same time. The chelating properties of the dithiocarbamate group allows the precipitation of complex or chelated metals.
Chemically stable sludge is generated thereby avoiding any secondary pollution.
Areas of Application
Accepta 4903 is a very effective heavy metal precipitation aid for the treatment of effluents created from a wide range of sectors including:
- Automotive industry
- Mining industry
- Chemical industry
- Electronics industry
- Electroplating industry
- Iron and steel manufacturing
- Leather factories
- Metal processing
- Photographic industry
- Printing factories
- Power stations
- Refineries of non-ferrous metals
- Solvent incinerators
- Waste incineration facilities
- Highly efficient heavy-metal precipitant for wastewater and effluent streams
- Versatile, can be used across many industry sectors
- Can be used with traditional chemical treatments to reduce levels of heavy-metals
- Removes co-existing heavy-metals
- Environmentally friendly profile
- Chelating agent with superior flocculating capabilities
- Available ready-to-use without prior dissolution or expensive make-up equipment
- Forms dense, compact sludge to minimise disposal costs
|Appearance:||Slightly yellowish liquid|
|Specific gravity:||1.15 – 1.25|
|Average Non-Volatile Solids (%):||40|
|pH:||9.0 – 11.0|
|Brookfield viscosity (cps):||0 – 50|
|Freezing point (°C):||< 0|
|Storage temperature (°C):||0 – 30|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For a stream without soluble complexes, Accepta 4903 should be added directly to the wastewater at a water pH of between 3 and 10. The dithiocarbamate functionality of the product reacts with the dissociated heavy-metal ion to form an insoluble complex and a floc will form.
The dosage of the chelating agent can be determined based on the composition of the water to be treated, the treatment already in place or a jar test.
When the pollution level is unknown, please contact Accepta for further technical assistance.
If necessary, a coagulant can be added to increase the size of the floc. To further enhance floc size and settling speed an anionic flocculant is sometimes added. A cationic polymer can also be used in specific cases.
To treat complexed heavy-metals in the wastewater please contact us for further technical assistance.
Accepta 4903 can effectively be removed from effluent discharges by filtering through activated carbon. This treatment is especially useful when excess product has been used to reduce soluble metals to very low levels.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.