All Organic Scale & Corrosion Inhibitor plus Dispersants – 0015

This product is no longer available.

Please contact us with your application requirements for an alternative or check out our list of Scale & Corrosion Inhibitors.


Accepta 0015 is a high performance, all organic scale and corrosion inhibitor with additional dispersants scientifically formulated for the treatment and protection of industrial re-circulating cooling water systems. 

Accepta 0015 is stable at elevated temperatures throughout a wide pH range (acid dosing is not required) and in the presence of oxidising disinfectants.

Accepta 0015 is a single all-in-one treatment that inhibits formation, corrosion, sedimentation and fouling when the cooling water system is treated in accordance with Accepta’s recommendations.

Accepta 0015 is a very effective treatment for modern cooling water systems operating with high calcium and alkalinity levels and has been proved successful in a large number of differing cooling systems.

Product Benefits

  • High performance scale and corrosion inhibitor with dispersants for industrial re-circulating cooling water systems.
  • All organic technology.
  • Halogen resistant.
  • High calcium tolerance.
  • Effective at Langelier Saturation Index up to +3.3
  • Allows elevated system concentration reducing running costs.
  • Excellent scale inhibitor in severe scaling conditions.
  • Simple test method.

Product Properties

Form: Liquid
Colour: Pale white/yellow colour
Odour: Barely perceptible
pH: 1.0 – 2.0
Water solubility: Miscible
Relative density: 1.15 – 1.25

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 0015 should be dosed proportional to the system make up to ensure a continuous reserve within the system water.

The product can be dosed direct from the drum or pre-diluted in a dosing tank.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.


Dosage levels will be dependent upon water quality, system conditions and operational factors. The correct level for your system will be advised by your technical consultant. A simple test method is available for on-site analysis.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg