Oil Emulsifier / Bio-penetrant Cooling Water Treatment – Kintec 3251

You are here:

This product is made to order and as such has a minimum order quantity applied to it.

 

Description

Kintec 3251 is a high performance cooling water treatment oil emulsifier and bio-penetrant developed for cooling systems suffering from oil-based contamination.

Kintec 3251 is scientifically formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties where the primary system contaminant is oil-based.

Kintec 3251 can also be used as a bio-penetrant to enhance the performance of oxidising biocides.

Product Benefits

  • High performance cooling water treatment
  • Excellent oil emulsifier and bio-penetrant for systems suffering from oil-based contamination
  • Formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties
  • Ideal for oil contaminated systems
  • Convenient liquid product

Product Properties

Form: Liquid
Colour: Clear, pale yellow
pH: 4.0 – 5.0
Specific Gravity: 1.00 – 1.05
Freezing Point: 0°C (<32°F)

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Target dosage is for Kintec 3251 is 10 – 100 ppm as product in the recirculating cooling water depending on the level of fouling seen in the system.

Dosage Strategy

Kintec 3251 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.

Performance Monitoring

Appropriate use of Kintec 3251 following the above dosing strategy should result in an oil-contaminant-free cooling system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For additional assistance please contact Accepta.

Test Methods

  • Not applicable

Material of Compatibility

Material Comments
SS : Recommended
MS : Acceptable
PE : Not recommended
PP : Not recommended
PVC : Not recommended
Teflon : Recommended

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg

Description

Kintec 3251 is a high performance cooling water treatment oil emulsifier and bio-penetrant developed for cooling systems suffering from oil-based contamination.

Kintec 3251 is scientifically formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties where the primary system contaminant is oil-based.

Kintec 3251 can also be used as a bio-penetrant to enhance the performance of oxidising biocides.

Product Benefits

  • High performance cooling water treatment
  • Excellent oil emulsifier and bio-penetrant for systems suffering from oil-based contamination
  • Formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties
  • Ideal for oil contaminated systems
  • Convenient liquid product

Product Properties

Form: Liquid
Colour: Clear, pale yellow
pH: 4.0 – 5.0
Specific Gravity: 1.00 – 1.05
Freezing Point: 0°C (<32°F)

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Target dosage is for Kintec 3251 is 10 – 100 ppm as product in the recirculating cooling water depending on the level of fouling seen in the system.

Dosage Strategy

Kintec 3251 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.

Performance Monitoring

Appropriate use of Kintec 3251 following the above dosing strategy should result in an oil-contaminant-free cooling system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For additional assistance please contact Accepta.

Test Methods

  • Not applicable

Material of Compatibility

Material Comments
SS : Recommended
MS : Acceptable
PE : Not recommended
PP : Not recommended
PVC : Not recommended
Teflon : Recommended

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch