Kintec 3251 is a high performance cooling water treatment oil emulsifier and bio-penetrant developed for cooling systems suffering from oil-based contamination.
Kintec 3251 is scientifically formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties where the primary system contaminant is oil-based.
Kintec 3251 can also be used as a bio-penetrant to enhance the performance of oxidising biocides.
- High performance cooling water treatment
- Excellent oil emulsifier and bio-penetrant for systems suffering from oil-based contamination
- Formulated from a non-ionic surface active agent with excellent cleaning and anti-fouling properties
- Ideal for oil contaminated systems
- Convenient liquid product
|Colour:||Clear, pale yellow|
|pH:||4.0 – 5.0|
|Specific Gravity:||1.00 – 1.05|
|Freezing Point:||0°C (<32°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage is for Kintec 3251 is 10 – 100 ppm as product in the recirculating cooling water depending on the level of fouling seen in the system.
Kintec 3251 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Kintec 3251 following the above dosing strategy should result in an oil-contaminant-free cooling system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Not applicable
Material of Compatibility
|PE :||Not recommended|
|PP :||Not recommended|
|PVC :||Not recommended|