Dispersant with Antifoam for Cooling Water Systems – 2306

£92.00 ex. VAT

Order Quantity (25Kg Drums/Kegs)1-45-89-1617-3132+
Quantity Discount %0%17%25%30%33%

Can be used as a replacement for Accepta 2551

Product Description & Dosage Information Below

Prices are for 25Kg Drums/Kegs. POA for 200kg/IBCs.


Accepta 2306 is a high performance non-ionic surface active agent dispersant with additional antifoam scientifically formulated for the treatment of cooling water systems including re-circulating and once-through cooling systems.

Accepta 2306 improves the performance of cooling systems, where fouling by microbiological slimes is reducing efficiency, by removing and dispersing the deposits.

Accepta 2306 is particularly effective when used in conjunction with chlorine and or bromine based biocides and is ideally suited to be dosed with sodium hypochlorite for cooling tower cleaning and disinfection procedures and legionella control activities in accordance with the UK HSE’s ACoP L8 dealing with the control of legionella bacteria.

Accepta 2306 is effective in both re-circulating and once-through cooling systems.

Product Benefits

  • High performance non-ionic dispersant with antifoam for open re-circulating and once-through cooling systems
  • Improves system performance where fouling by microbiological slimes is reducing efficiency.
  • Excellent when used with chlorine / bromine based biocides.
  • Ideal for HSE ACoP L8 legionella compliance cooling tower disinfections when used with sodium hypochlorite.

Product Properties

Fprm: Liquid
Colour: Cloudy colourless
Odour: Slight
pH (2% solution): 5.0 – 7.0
Density: ~1.00

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 2306 should be fed continuously into the system at a point where it will be mixed and uniformly distributed.

Accepta 2306 may be diluted with water if required.

For cooling tower disinfection procedures and legionella control activities under the HSE’s ACoP Accepta 2306 should be dosed at the rate of 100ml/m3 of system volume.

For continuous dosage to enhance the performance of biocide programmes in either a recirculating or once through system a dosage of 5-10ml/m3 of make-up should be maintained.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 2306 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.

    Additional information

    Weight 25 kg
    Dimensions 30 × 23 × 47 cm