Accepta 2321 is a high-performance cooling water dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including re-circulating and once-through cooling water systems.
Accepta 2321 is a high specification product developed to improve the performance of cooling water systems where fouling by microbiological slimes is reducing overall system efficiency, by removing and dispersing the unwanted deposits.
Accepta 2321 is extremely effective at controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
- Powerful dispersant
- Suitable for use in both re-circulating and once through cooling water systems
- Improves the performance of cooling water systems
- Improves system efficiency
- Removes and disperses unwanted deposits
- Controls oil based fouling
Colour: Clear yellow
Relative density: 1.05
Solubility in water: Complete
Boiling point: ~100oC
Flash point: >100oC
Application & Dosage Information
Accepta 2321 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
Accepta 2321 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for Accepta 2321 will be in the range of 1 – 100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 2321 please contact Accepta.
*Full details of the product properties are available in the Safety Data Sheet. See below.