Accepta 2332 is a high performance low nitrite – molybdate corrosion inhibitor scientifically formulated for the treatment of closed circuit systems including closed chilled water and low pressure heating systems.
Based on a blend of organic and inorganic corrosion inhibitors Accepta 2332 is proven to provide superior protection for steel, copper and other non-ferrous metals.
Accepta 2332 is a highly efficient formulation providing the ideal treatment for closed chilled water and low pressure heating systems.
IMPORTANT – Accepta 2332 is NOT intended for use in systems containing Aluminium.
- Superior quality corrosion inhibitor
- Developed specifically for use in closed circuit systems
- Proven protection for steel, copper and other non-ferrous metals
- Ideal for closed chilled water and low pressure heating systems
|Solubility in water:||Miscible|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Typically Accepta 2332 should be dosed at 1.5-2.0 kg/m3 in order to give an active reserve of 55-75mg/L molybdate (as Mo04) and 410-560 mg/l (as NaNO2).
Control limits of 8-10.5 pH and a maximum of 2000mg/l TDS are recommended.
Accepta 2332 is typically dosed alongside a biocide such as Accepta 2827 Isothiazolone to control bacterial levels in the closed system.
NOTE: Accepta 2332 is NOT intended for use in systems containing Aluminium.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 2332 please contact Accepta.