All Organic Low Solids Treatment for Medium to High Pressure Hot Water Systems – 2220

This product has been replaced by Accepta 2320

Description

Accepta 2220 is a high performance water treatment chemical scientifically formulated from an all organic tannin to create a highly effective treatment for medium to high pressure hot water systems.

Accepta 2220 comprises a low solids, non-caustic formulation for the treatment of closed systems that can be used in copper containing systems.

IMPORTANT – Do not use Accepta 2220 if aluminium is present in the system.

Product Benefits

  • High performance treatment for medium to high pressure hot water systems
  • All organic tannin based treatment
  • Low solids formulation
  • Non-caustic
  • Suitable for systems containing copper

Product Properties

Composition: Aqueous solution
Specific gravity: 1.09 – 1.10
pH: 9.5 – 11

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Dose Accepta 2220 at 400-600 ppm.

Control/Product factor 80-120ppm as tannin.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 2220 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg