Corrosion Inhibitor with Anodic & Cathodic Site Pacifiers – 0028

This product has been replaced by Accepta 2332


Accepta 0028 is a new and highly advanced water treatment product comprising a corrosion inhibitor formulated with both anodic and cathodic site pacifiers.

Accepta 0028 will control both ferrous and non-ferrous metal corrosion at elevated temperatures and under a variety of water conditions and flow velocities.

Accepta 0028 provides protection to systems containing ferrous metals, copper, copper alloys, zinc by utilising a blend of powerful inhibitors operating at a neutral pH.

Experience has shown that this product gives excellent protection to hot water heating systems, and closed cooling / chilled water systems.

Product Benefits

  • Highly advanced corrosion inhibitor formulated with both anodic and cathodic site pacifiers.
  • Liquid product facilitates easy handling and dosing.
  • Provides effective protection to all system metals including zinc and copper alloys.
  • Non-foaming.
  • Contains no metallic elements.

Product Properties

Form: Liquid
Colour: Pale yellow
Odour: Slight amine like
pH: 7.0 – 8.0
Water solubility: Miscible
Relative density: 1.05 – 1.10

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 0028 can be introduced to the system by pump to a suitable dosing point, via a dosage pot or via the system header tank.

The system should be cleaned and passivated prior to the introduction of product to minimise the risk of blockages and the potential for under deposit corrosion.

Providing there is no loss of water from the system, only occasional make-up doses are normally required to ensure continuing protection to the system. If make-up water is necessary, Accepta 0028 should be dosed at the same treatment level as the initial dose immediately.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.


A simple test kit is available to monitor, control and maintain correct levels of Accepta 0028 in the system water.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.

    Additional information

    Weight 25 kg