Accepta 0027 is a new and highly advanced water treatment corrosion inhibitor incorporating both anodic and cathodic site pacifiers that are scientifically formulated for the protection of closed cooling and chilled water systems, and hot water heating systems.
Accepta 0027 will control both ferrous and non-ferrous metal corrosion at elevated temperatures and under a variety of water conditions and flow velocities.
Accepta 0027 provides protection to systems containing ferrous metals, copper, copper alloys, zinc and aluminium by utilising a blend of powerful inhibitors operating at a neutral pH.
Experience has shown that Accepta 0027 gives excellent protection to hot water heating systems, and closed cooling / chilled water systems.
- Highly advanced corrosion inhibitor formulated with both anodic and cathodic site pacifiers.
- Liquid product facilitates easy handling and dosing.
- Provides effective protection to all system metals including zinc, aluminium and copper alloys.
- Contains no metallic elements.
|Odour:||Slight amine like|
|pH:||7.0 – 8.0|
|Relative density:||1.05 – 1.10|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 0027 can be introduced to the system by pump to a suitable dosing point, via a dosage pot or via the system header tank.
The system should be cleaned and passivated prior to the introduction of product to minimise the risk of blockages and the potential for under deposit corrosion.
Providing there is no loss of water from the system, only occasional make-up doses are normally required to ensure continuing protection to the system.
If make-up water is necessary, Accepta 0027 should be dosed at the same treatment level as the initial dose immediately.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
A simple test kit is available to monitor, control and maintain correct levels of Accepta 0027 in the system water.