PS300 / AT-2318 – Scale Dispersant & Sludge Conditioner for Steam Boilers & Cooling Water Systems

You are here:

£170.90 ex. VAT

Quantity discount tiers

5-8

17%

DISCOUNT

9-16

25%

DISCOUNT

17-31

30%

DISCOUNT

32+

33%

DISCOUNT

Prices are for 25Kg Drums/Kegs. POA for 200kg/IBCs.

This product can be used as a replacement for Accepta 2814.

Description

PS300 / AT-2318 is an advanced scale dispersant and sludge conditioner water treatment product developed for use in both steam boilers and cooling water systems.

PS300 / AT-2318 is formulated from a specially blended mixture of polymeric sludge conditioners developed for use in steam boilers and cooling water systems.

PS300 / AT-2318 works using a combination of chelation, crystal modification and the threshold effect, and is effective against a wide range of scalants including calcium and magnesium hardness, iron oxide and silica. PS300 / AT-2318 converts the scaling material into a light mobile floc, which can be blowndown easily.

PS300 / AT-2318 will gradually re-disperse old deposits and may be used as part of a maintenance ’clean up’ programme.

Product Benefits

  • High performance anionic high molecular weight latex emulsion polyacrylamide co-polymer
  • Excellent scale dispersant and sludge conditioner water treatment product
  • Ideal for both steam boilers and cooling water systems
  • Will flocculate suspended solids
  • Ideal for for non-potable raw water clarification
  • Primary and secondary effluent clarification
  • Oily waste water clarification
  • Filtration

Product Properties

Form: Liquid
Colour: Golden
pH: 7 – 8
Flammable: No

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

PS300 / AT-2318 is normally dosed to maintain 50-100 ppm in the system, although, if it is being used as part of a ‘clean up’ programme, higher levels may be maintained.

PS300 / AT-2318 is compatible with other commonly used treatments and can be dosed from the same mixing tank.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Description

PS300 / AT-2318 is an advanced scale dispersant and sludge conditioner water treatment product developed for use in both steam boilers and cooling water systems.

PS300 / AT-2318 is formulated from a specially blended mixture of polymeric sludge conditioners developed for use in steam boilers and cooling water systems.

PS300 / AT-2318 works using a combination of chelation, crystal modification and the threshold effect, and is effective against a wide range of scalants including calcium and magnesium hardness, iron oxide and silica. PS300 / AT-2318 converts the scaling material into a light mobile floc, which can be blowndown easily.

PS300 / AT-2318 will gradually re-disperse old deposits and may be used as part of a maintenance ’clean up’ programme.

Product Benefits

  • High performance anionic high molecular weight latex emulsion polyacrylamide co-polymer
  • Excellent scale dispersant and sludge conditioner water treatment product
  • Ideal for both steam boilers and cooling water systems
  • Will flocculate suspended solids
  • Ideal for for non-potable raw water clarification
  • Primary and secondary effluent clarification
  • Oily waste water clarification
  • Filtration

Product Properties

Form: Liquid
Colour: Golden
pH: 7 – 8
Flammable: No

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

PS300 / AT-2318 is normally dosed to maintain 50-100 ppm in the system, although, if it is being used as part of a ‘clean up’ programme, higher levels may be maintained.

PS300 / AT-2318 is compatible with other commonly used treatments and can be dosed from the same mixing tank.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch