Accepta 2550 is a high performance multipurpose water treatment product scientifically formulated for boilers and other steam raising plant that is available as an all-in-one, low solids formulation.
Accepta 2550 is specially formulated using a blend of polyamines and neutralising amines. The polyamines act to control corrosion by filming on the metal surfaces. They also act as a sludge conditioner.
The neutralising amines in Accepta 2550 provide alkalinity and protect the condensate lines.
- High performance all-in-one multipurpose chemical treatment for boilers and other steam raising plant.
- Excellent corrosion control.
- Protects condensate lines.
- Sludge conditioner.
- Single shot, low solids formulation.
- Very cost effective in use – low dosage rates.
|Composition:||Aqueous emulsion of polyamine and amines|
|Specific Gravity @ 20°C:||1.01|
|pH:||9 – 12|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Dose Accepta 2550 at the following rate:
600 / boiler concentration factor
Dose product in proportion to make-up.
Control Accepta 2550 dosing to achieve 5 – 15 ppm polyamine in the boiler water and 2 – 5 ppm in the condensate.
Do not over dose or shot dose.
Accepta 2550 is cationic, do not use with conventional boiler water treatment products.
Do not mix Accepta 2550 with other products.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
IMPORTANT – This product is NOT suitable for use in hospitals or where steam contacts food.
Use Accepta polyamine test.