Sodium Chlorite (3%) Precursor for Generation of Chlorine Dioxide – 2854

This product has been discontinued. Please see Accepta 1103 as a replacement.

Description

Accepta 2854 is a superior quality precursor used for the generation of chlorine dioxide. This product is based on 3% sodium chlorite in an aqueous solution. NOTE: This product is no longer available and has been replaced by the following alternative: Accepta 2855 If you require product selection assistance or technical advice please contact us.

Chlorine dioxide is made by reacting sodium chlorite and an acid in a controlled manner.Chlorine dioxide is a highly effective super sanitizing chemical agent that is highly recommended for use where the control of microbiological activity is essential, if not critical. Because of its biocidal characteristics, chlorine dioxide is ideal for the control of surface and waterborne pathogens; and the control and removal of stubborn biofilm. In fact, it has consistently been shown to be the best molecule for eradicating the causative organism of Legionnaires’ disease.In the UK, the Building Services Research and Information Association has recommended chlorine dioxide as the best available technology for control of Legionella in hot and cold water systems.

Product Benefits

  • High quality precursor for the generation of chlorine dioxide.

Product Properties

Appearance: Clear pale yellow liquid
Boiling point: 100 oC
Density (kg/m3): 1.02 – 1.05
pH (concentrate): 11.0 – 13.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Dose Accepta 2854 as required. There acid selected should match the strength of the chlorite product where possible.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg