DF-C / AT-2315 Food Grade Silicone Antifoam – For Cooling & Other Water Systems

You are here:

£87.00£177.10 ex. VAT

Quantity discount tiers

5-8

17%

DISCOUNT

9-16

25%

DISCOUNT

17-31

30%

DISCOUNT

32+

33%

DISCOUNT

10Kg or 25Kg Drums/Kegs (Liquid Product)

IBC & 200L POA

Can be used as a replacement for Accepta 2593 and 2053

Description

DF-C / AT-2315 is a high performance food grade silicone antifoam scientifically formulated for the control of unwanted foaming in cooling water and other water systems.

DF-C / AT-2315 is a superior; silicone based cooling water antifoam emulsion which combines high efficiency with outstanding versatility for a wide variety of applications.

Product Benefits

  • High performance silicone based antifoam
  • Food grade
  • Excellent for cooling water systems
  • Very versatile, can be used in a wide variety of applications

Product Properties

Form: Liquid
Colour: Off white
Odour: Negligible
pH: ~ 7.0
Relative density: 1.0
Solubility in water: Dispersable

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

DF-C / AT-2315 is typically applied between 5 and 100ppm in the re-circulating water.

DF-C / AT-2315 may be diluted using either softened or demineralised water, for continuous pumped application. However, where only intermittent dosage is required it is recommended that DF-C / AT-2315 is premixed with 4 parts water prior to addition to the system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Application in a cooling tower clean

When using Activ-Ox foam cleaning products drain the tower sump and fill with 2 inches of clean water and add the following cocktail of chemicals to neutralise the foam as it drips into the sump.

-Approx 500ml/m3 of Accepta 2315 Defoamer

-Approx 500ml/m3 of Accepta Dechlor

Boiler water dosages should start from 1ppm up to a maximum of 5ppm.

For further technical assistance concerning DF-C / AT-2315 please contact Accepta.

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm
Size

10Kg, 25kg

Description

DF-C / AT-2315 is a high performance food grade silicone antifoam scientifically formulated for the control of unwanted foaming in cooling water and other water systems.

DF-C / AT-2315 is a superior; silicone based cooling water antifoam emulsion which combines high efficiency with outstanding versatility for a wide variety of applications.

Product Benefits

  • High performance silicone based antifoam
  • Food grade
  • Excellent for cooling water systems
  • Very versatile, can be used in a wide variety of applications

Product Properties

Form: Liquid
Colour: Off white
Odour: Negligible
pH: ~ 7.0
Relative density: 1.0
Solubility in water: Dispersable

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

DF-C / AT-2315 is typically applied between 5 and 100ppm in the re-circulating water.

DF-C / AT-2315 may be diluted using either softened or demineralised water, for continuous pumped application. However, where only intermittent dosage is required it is recommended that DF-C / AT-2315 is premixed with 4 parts water prior to addition to the system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Application in a cooling tower clean

When using Activ-Ox foam cleaning products drain the tower sump and fill with 2 inches of clean water and add the following cocktail of chemicals to neutralise the foam as it drips into the sump.

-Approx 500ml/m3 of Accepta 2315 Defoamer

-Approx 500ml/m3 of Accepta Dechlor

Boiler water dosages should start from 1ppm up to a maximum of 5ppm.

For further technical assistance concerning DF-C / AT-2315 please contact Accepta.

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm
Size

10Kg, 25kg

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch