Lakos Separator – Stainless Steel

£30.00£5,705.00 ex. VAT

See specifications in the description below.

For the more cost effective Carbon Steel Lakos unit click here

Clear

Description

Lakos Separators

The Lakos separator is installed in the full circuit or, more commonly, on a side-stream of the system pipework. Water flows through the Lakos separator and the cyclone or centrifugal action of the hydrocyclone causes the heavier-than-water particles to be thrown to the dirt bowl of the unit, from where they are purged.

Item Order Code   Flow Rate m3/hour Inlet/Outlet Diameter  Weight Kg 
Stainless Steel Units (Basic without optional extras)
1L-0050-S Stainless Steel Lakos Separator LAK0050S 1.0 – 2.5 1/2″ 6
1L-0075-S Stainless Steel Lakos Separator LAK0075S 2.5 – 4.5 3/4″ 7
1L-0100-S Stainless Steel Lakos Separator LAK0100S 4.5 – 7.5 1″ 12
1L-0125-S Stainless Steel Lakos Separator LAK0125S 6.5 – 11 1 1/4″ 12
1L-0150-S Stainless Steel Lakos Separator LAK0150S 10 – 16 1 1/2″ 12
1L-0200-S Stainless Steel Lakos Separator LAK0200S 15 – 23.5 2″ 23
1L-0250-S Stainless Steel Lakos Separator LAK0250S 21.5 – 32 2 1/2″ 25

Additional Extras

3/4″ manual dump valve
3/4″ Solenoid dump valve
Dumping timer (pulse/pause)

Technical Support

If you require additional information or specialist technical support concerning our chlorine dioxide generators please contact Accepta’s technical support team.

Lakos ILS Specification Sheet

Guidance on Lakos specification and maintenance can be found on the spec sheet PDF here.

Lakos ILS Installation Guide

For full details concerning installation of your Lakos ILB separator please download this PDF guide.

Additional information

Weight N/A
Model

1L-0050-S Lakos Separator, 1L-0075-S Lakos Separator, 1L-0100-S Lakos Separator, 1L-0125-S Lakos Separator, 1L-0150-S Lakos Separator, 1L-0200-S Lakos Separator, 1L-0250-S Lakos Separator, 3/4" manual dump valve, 3/4" Solenoid dump valve, Dumping timer (pulse / pause)