Accepta 8010 is a highly effective bio-dispersant manufactured from a solution of a powerful surface active agents. Accepta 8010 is designed to improve the performance of cooling water systems, where fouling by microbiological slimes is reducing efficiency, by removing and dispersing the deposits. Accepta 8010 is also extremely effective at controlling oil based fouling.
Accepta 8010 is effective in both re-circulating and once-through cooling water systems.
Accepta 8010 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
Accepta 8010 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, Teflon, polyethylene, acrylic resin or polypropylene. Dosage levels will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled. Use biocides safely. Always read the label and product information before use. For further technical assistance please contact Accepta. |
|
